|
Creo Parametric 选项对话框中的 2D 设置
|
相应配置选项
|
默认值和备用值
|
|
“导出的首选可交付结果:”(Preferred deliverable for export:)
|
pdf*, iges, dxf, step, cgm, dwg, tiff, medusa, stheno
|
|
|
“CGM 导出格式版本:”(CGM export format version:)
|
1*, 3
|
|
|
“DXF 导出格式版本:”(DXF export format version:)
|
12, 13, 14, 2000, 2004, 2007, 2010, 2013, 2018*
|
|
|
“DWG 导出格式版本:”(DWG export format version:)
|
14, 2000, 2004, 2007, 2010, 2013, 2018*
|
|
|
“DXF 和 DWG 导出映射文件位置:”(DXF and DWG Export mapping file location:)
|
DXF 或 DWG 映射文件的路径。
|
|
|
“将文本符号映射为”(Map Text Symbols To)
|
asme*, iso, stroked asme, stroked iso, legacy
|
|
|
“导出时将样条和剖面线图元转换为:”(When exporting, convert spline and hatch entities to:)
|
spline_and_hatch*, spline only, hatch only, none
|
|
|
“将绘图比例导出为 DXF 或 DWG 格式”(Export drawing scale to DXF or DWG format)
|
yes, no*
|
|
|
“导出为 DXF 或 DWG 格式时缩放绘图视图”(Scale drawing views when exporting to DXF or DWG format)
|
yes, no*
|
|
|
“导出时支持 DXF 格式的 Unicode 编码”(When exporting, support the Unicode encoding for DXF format)
|
yes, no*
|
|
|
“导出遮蔽的层”(Export blank layers)
|
yes, no*
|
|
|
“将多行文本注解导出为 AutoCAD MTEXT”(Export Multiline Text notes as AutoCAD MTEXT)
|
yes*, no
|
|
|
“将几何图元导出为三次 B 样条”(Export geometry entities as third-degree B-splines)
|
||
|
“将绘图视图信息导出为 IGES 格式”(Export drawing view information to IGES format)
|
yes, no*
|
|
|
“将绘图符号导出为 IGES 符号”(Export drawing symbol as an IGES symbol)
|
yes, no*
|
|
|
“将绘制剖面线导出为 IGES 格式:”(Export draft cross-hatching to IGES format as:)
|
yes (IGES 剖切区域图元)，no* (单独几何图元)
|
|
|
“将绘图视图和关联的 3D 模型导出为 STEP 格式:”(Export drawing views and associated 3D models to STEP format:)
• “仅导出 2D 表示”(Export only 2D representation)
• “导出几何及与其关联的视图”(Export geometry with its associative views)
• “导出几何及与其关联的视图和视图的相关注释”(Export geometry with its associative views and view related annotations)
|
no* (仅导出 2D 表示)，as_3d_views (导出几何及与其关联的视图)，as_3d_views_assoc_draft (导出几何及与其关联的视图和视图的相关注释)
|
|
|
“DXF 和 DWG 导入映射文件位置:”(DXF and DWG import mapping file location:)
|
用于导入 DXF 和 DWG 文件的映射文件的路径。
|
|
|
“将块作为 DXF 和 DWG 格式的符号导入”(Import blocks as symbols from DXF and DWG format)
|
yes, no*
|
|
|
“将带有可变尺寸页面的导入的 IGES、DXF、DWG 和 STEP 文件放置在:”(Imported IGES, DXF, DWG, and STEP files with a variable-sized sheet placed on:)
• “适当的可变尺寸格式”(Appropriate variable size format)
• “标准尺寸格式”(Standard sized format)
|
yes* (适当的可变尺寸格式)，no (标准尺寸格式)
|
|
|
“分解不受支持的 AutoCAD 图元”(Explode unsupported AutoCAD entities)
|
intf2d_in_acad_expl_unsupp_ents
|
yes*, no
|
|
“导入 MTEXT 时创建多行注解”(Create a Multiline Note when importing MTEXT)
|
yes*, no
|
|
|
“使导入的 IGES、DXF 和 DWG 尺寸与几何关联”(Associate imported IGES, DXF and DWG dimensions to geometry)
|
yes, no*
|